![[Hot Item] Children's Educational Toys Adult Design-Work 130-230 Degree High Temperature 3D Printing Pen](http://image.made-in-china.com/2f0j00CkFciZnJPaqM/Children-s-Educational-Toys-Adult-Design-Work-130-230-Degree-High-Temperature-3D-Printing-Pen.webp)
Product Details
Basic Info.
Model NO.
XH-PP-800
Degree of Innovation
Innovative
Type
USB Writing Board
Discharging Mode
Hot Melt Extrusion Molding
Molding
Three-Dimensional Molding
Working Voltage
5V 2A
Temperature
130-230 Degree Celsius Adjustable
Spiting Speed
Infinitely Variable Speed
Nozzle Diameter
0.7mm
Supplies Diameter
1.75mm
Product Weight
45g
Display
LED
Transport Package
Color Box
Specification
180*45*38mm
Trademark
OEM
Origin
China
HS Code
8477900000
Production Capacity
10000PCS/Month
Product Description
Product and Model:
Children's Educational Toys Adult Design-Work 130-230 Degree High Temperature 3d Printing Pen (XH-PP-800)
Specs:
1) LED display can directly show the temperature, materials used
2) Use the material: PLA, ABS
3) Support dual-mode for feeding: hold the "Forward" button to feed continuously and release to stop feeding, or double press the "Forward" button to feed continuously and press again to stop feeding
4) Long press "Return" button for 2 seconds to return the supplies automatically
5) Printing temperature: 130~230°C
6) The material of the pen tip: aviation pottery material, high temperature resistant and non clogging nozzle
7) Working conditions: 10~35°C
8) Applicable age: over 12 years old
9) Product size: 180*45*38mm, weight 140g
10)Product color: yellow, blue, purple, white
11)Packing: 40pcs/ctn, ctn size 53*42.5*37cm, G.W. 17kg
Warnings!
1. This equipment is suitable for children over 8 years old and adult. It can be used by children under the guardianship of adults.
2. Front near the tip and the device for high temperature danger zone, so it is forbidden to touch or use the pen point touch other items.
3. It is prohibited to insert foreign body into the entry hole.
4. The equipment is precision electronic instruments, keep it away from water and other liquids.
5. Please put it in a safe place, to prevent falling from high altitude or away for children's touch.
Packing List
1 × 3D pen
1 × Power adapter
1 × Pen cap
1 × User Manual
1 × Material PCL
Operating instructions:
1. Connect the power adapter with power source, and the other end into the 3D pen. If the Red LED lights on, the LED screen displays "PLA" , it means the equipment has entered the standby state.
2. The LED screen displays "PLA" or "ABS", selecting the supplies by pressing the "Temperature control switch/Material selection" button. To avoid malfunction, the selection must be same as the supplies attribute.
3. Press "Forward" button, the red LED light change to yellow, which indicates that the equipment has entered into warm-up state. When the red LED lights changes to blue. It means the warm-up process is finished and the equipment can operate normally.
4. Insert the supplies into the "supplies introduction hole", then press "Foward" button, supplies will be conveyed by the built-in motor of the equipment. When the glue is spit out from the integrated nozzle heating head, it means the 3D pen is installed successfully.
5. Recommended operating temperature for PLA and ABS: PLA(185-210ºC), ABS(210-230ºC). Different colors of homogeneous supplies have different melting points, please tune the temperature according to the yielding situation. (Please refer to " temperature tuning" part for the melting point and temperature adjustment of the supplies)
6. The device will enter into sleeping mode automatically and the LED screen will display "SLEEP" when the device is not used more than 3 minutes. If you need to use it again, press "Forward" button to trigger it.
7. If you need to change supplies, please press "Return" for 2 seconds and then repeat step 4.
Note
Heating time is influenced by preset temperature and environmental temperature.
Remember to uninstall the supplies after use.
Temperature Tuning
Due to the different melting points for different color supplies, in order to improve the quality of creation, please pay attention to the following questions:
In low speed working mode, if you hear "crackling" sound from the nozzle end, it means the temperature is too high, press"Temperature control switch "button to turn the temperature down, the adjustment range should be 5-10ºC. In normal working mode, if encounter lots of bubbles, showed that the temperature is too high, press the "Temperature control switch" button to turn the temperature down, the adjustment range should be 3-8ºC. If the surface color of extrusion glue become dim and dark, sounds of the motor become obviously difficulty, it means the temperature is too low, use the temperature control switch button to raise the temperature, the adjustment range should be 5-10ºC. Normal spiting should be smooth without bubbles. (occasionally bubbles)
Product Show:
Lead Time:
Shipping Way:
By DHL/UPS/FedEx and by Air for small quantity orders, by Sea for big orders.
Children's Educational Toys Adult Design-Work 130-230 Degree High Temperature 3d Printing Pen (XH-PP-800)
Specs:
1) LED display can directly show the temperature, materials used
2) Use the material: PLA, ABS
3) Support dual-mode for feeding: hold the "Forward" button to feed continuously and release to stop feeding, or double press the "Forward" button to feed continuously and press again to stop feeding
4) Long press "Return" button for 2 seconds to return the supplies automatically
5) Printing temperature: 130~230°C
6) The material of the pen tip: aviation pottery material, high temperature resistant and non clogging nozzle
7) Working conditions: 10~35°C
8) Applicable age: over 12 years old
9) Product size: 180*45*38mm, weight 140g
10)Product color: yellow, blue, purple, white
11)Packing: 40pcs/ctn, ctn size 53*42.5*37cm, G.W. 17kg
Warnings!
1. This equipment is suitable for children over 8 years old and adult. It can be used by children under the guardianship of adults.
2. Front near the tip and the device for high temperature danger zone, so it is forbidden to touch or use the pen point touch other items.
3. It is prohibited to insert foreign body into the entry hole.
4. The equipment is precision electronic instruments, keep it away from water and other liquids.
5. Please put it in a safe place, to prevent falling from high altitude or away for children's touch.
Packing List
1 × 3D pen
1 × Power adapter
1 × Pen cap
1 × User Manual
1 × Material PCL
Operating instructions:
1. Connect the power adapter with power source, and the other end into the 3D pen. If the Red LED lights on, the LED screen displays "PLA" , it means the equipment has entered the standby state.
2. The LED screen displays "PLA" or "ABS", selecting the supplies by pressing the "Temperature control switch/Material selection" button. To avoid malfunction, the selection must be same as the supplies attribute.
3. Press "Forward" button, the red LED light change to yellow, which indicates that the equipment has entered into warm-up state. When the red LED lights changes to blue. It means the warm-up process is finished and the equipment can operate normally.
4. Insert the supplies into the "supplies introduction hole", then press "Foward" button, supplies will be conveyed by the built-in motor of the equipment. When the glue is spit out from the integrated nozzle heating head, it means the 3D pen is installed successfully.
5. Recommended operating temperature for PLA and ABS: PLA(185-210ºC), ABS(210-230ºC). Different colors of homogeneous supplies have different melting points, please tune the temperature according to the yielding situation. (Please refer to " temperature tuning" part for the melting point and temperature adjustment of the supplies)
6. The device will enter into sleeping mode automatically and the LED screen will display "SLEEP" when the device is not used more than 3 minutes. If you need to use it again, press "Forward" button to trigger it.
7. If you need to change supplies, please press "Return" for 2 seconds and then repeat step 4.
Note
Heating time is influenced by preset temperature and environmental temperature.
Remember to uninstall the supplies after use.
Temperature Tuning
Due to the different melting points for different color supplies, in order to improve the quality of creation, please pay attention to the following questions:
In low speed working mode, if you hear "crackling" sound from the nozzle end, it means the temperature is too high, press"Temperature control switch "button to turn the temperature down, the adjustment range should be 5-10ºC. In normal working mode, if encounter lots of bubbles, showed that the temperature is too high, press the "Temperature control switch" button to turn the temperature down, the adjustment range should be 3-8ºC. If the surface color of extrusion glue become dim and dark, sounds of the motor become obviously difficulty, it means the temperature is too low, use the temperature control switch button to raise the temperature, the adjustment range should be 5-10ºC. Normal spiting should be smooth without bubbles. (occasionally bubbles)
Product Show:
Lead Time:
| Sample | 2 days |
| 100 pcs | 6 days |
| 500 pcs | 8 days |
| 1000 pcs | 10days |
| 5000 pcs | 20days |
| 10000pcs | 30days |
Shipping Way:
By DHL/UPS/FedEx and by Air for small quantity orders, by Sea for big orders.
![[Hot Item] Hot Sale Professional Manufacturer Photo Crystal 3D Laser Engraving Machine](http://image.made-in-china.com/2f0j00EngVUtfGRApH/Hot-Sale-Professional-Manufacturer-Photo-Crystal-3D-Laser-Engraving-Machine.webp)
![[Hot Item] 3D Exercise Fitness Keychain Mini Llaveros Men Gym Gifts Rubber Kettlebell Keychain](http://image.made-in-china.com/2f0j00BbiMWfognPcS/3D-Exercise-Fitness-Keychain-Mini-Llaveros-Men-Gym-Gifts-Rubber-Kettlebell-Keychain.webp)
![[Hot Item] Iboss High Quality 3D Printer Filamen Toughness Enhanced PRO PLA Orange](http://image.made-in-china.com/2f0j00FUibzoHyLOcW/Iboss-High-Quality-3D-Printer-Filamen-Toughness-Enhanced-PRO-PLA-Orange.webp)
![[Hot Item] PLA Filament Net Weight 1kg Transparent Gradient Tri- Color Purple Blue Green 3D Printer Filament](http://image.made-in-china.com/2f0j00HGfeAnUrYuoD/PLA-Filament-Net-Weight-1kg-Transparent-Gradient-Tri-Color-Purple-Blue-Green-3D-Printer-Filament.webp)
![[Hot Item] 2004 Animal 3D Custom Logo Keychain for Souvenir](http://image.made-in-china.com/2f0j00zSdtkBqcniuD/2004-Animal-3D-Custom-Logo-Keychain-for-Souvenir.webp){kind=logo}
![[Hot Item] Factory Wholesale Cheap Custom Design Your Own Logo Blank 3D Gold Metal Award Marathon Running Basketball Sport Medal](http://image.made-in-china.com/2f0j00dCMoLcBIfUkz/Factory-Wholesale-Cheap-Custom-Design-Your-Own-Logo-Blank-3D-Gold-Metal-Award-Marathon-Running-Basketball-Sport-Medal.webp){kind=logo}
![[Hot Item] Manufacturer Wholesale Custom Logo 3D Round Antique Old Commemorative Metal Collectible Gold Silver Challenge Coin](http://image.made-in-china.com/2f0j00ftVklPZhgiWv/Manufacturer-Wholesale-Custom-Logo-3D-Round-Antique-Old-Commemorative-Metal-Collectible-Gold-Silver-Challenge-Coin.webp){kind=logo}
![[Hot Item] Hot Sale Fashion Aminal 3D Men Copper Antique Solid Belt Buckle Safety Belt Buckle Personalized Belt Buckles Metal Jackass Belt Buckle](http://image.made-in-china.com/2f0j00nhIYkRKCLBqS/Hot-Sale-Fashion-Aminal-3D-Men-Copper-Antique-Solid-Belt-Buckle-Safety-Belt-Buckle-Personalized-Belt-Buckles-Metal-Jackass-Belt-Buckle.webp)
