![[Hot Item] FI-MT Cable Checking Enhanced Sensitivity High Resolution Improved Measurement Accuracy Advanced Single Multi-Core Integrated Fiber End-Face Interferometer](http://image.made-in-china.com/2f0j00tPgBEWcFbZko/FI-MT-Cable-Checking-Enhanced-Sensitivity-High-Resolution-Improved-Measurement-Accuracy-Advanced-Single-Multi-Core-Integrated-Fiber-End-Face-Interferometer.webp)
Product Details
- Overview
- Neofibo : Your Reliable Supplier
- Products Description
- Specification
- About Us
- FAQ
Basic Info.
Model NO.
FI-MT
Certification
CE, ISO
Condition
New
Use
Fiber Optic End-Face Interferometer
Objective Magnification
2X
Resolution
2.6um
Light Source
Red + White
Power
24V 10A
Interferometer Fiber
Patch-Cord End-Face Interferometer
Interferometers
Fiber Optic Interferometer
Optical Interferometer
Interferometer Based Optical Spectrum Analyzers
Who Built The First Optical Interferomet
Interferometer Optics Technoligy Inc
Fiber Optic Mach Zehnder Interferometer
Interferometer Based Optical Spectrum Analyzers
Fiber Optic Interferometer Use
Define Optical Interferometer
Optical Interferometer Uses
Jobs in Optical Interferometer
Fibre Optic Interferometer Based Sensor
Fibre Optic Interferometer Based Sensing
Optical Phase Interferometer
Interferometer Optical Sensor
Optical Delay Line Interferometer
Interferometer Optics Technology Inc
Transport Package
Shockproof Packaging with Foam, Caton Box
Specification
3D testing
Trademark
Neofibo
Origin
Shenzhen China
Packaging & Delivery
Package Size
33.00cm * 28.00cm * 17.00cm
Package Gross Weight
5.000kg
Product Description
NEOFIBO FI-MT Fiber End-face Interferometer Fiber Optic Interferometer
(2)Simple software measurement interfeace.
FI-MT measurement software interface is intuitive and clear, easy to operate, and supports Chinese and English display. The software will automatically analyze and judge the data of the tested part, and reduce the geometric end face of the tested part to a three-dimensional diagram, giving 2D diagrams of the multi-core connector, section line diagrams, and single-core connector surface roughness diagrams, isometric diagrams, which is convenient for users to intuitively judge the condition of the connector's end face under test. At the same time, it automatically generates test reports and test data reports in Excel file format, which is convenient for document management and printing. In addition, single multi-core software switching just click a button, the software will automatically read the internal storage information according to the situation and convert the light source, standards, measurement mode and other information. To do a real one-button switch.
(3) convenient and intuitive hardware operation.
FI-MT interferometer only needs to connect the power cord and USB cable to complete the hardware connection. The interferometer fixture adopts taper angle locking positioning, no need to do any hardware adjustment after installing on the interferometer, through the software can complete the optical fiber image center positioning work. PC measurement mode and APC measurement mode conversion does not need to replace the fixture, and do not need to re-calibrate the interferometer, as long as the angle of the operating platform adjusted to the corresponding position can be directly measured.
(4) Fully automatic calibration, focusing and measurement functions.
FI-MT interferometer has built-in automatic calibration module, the whole process is simple and fast. The software has detailed text and picture prompts wizard to make the user's calibration more convenient, fast and intuitive. After the calibration is completed, the measurement software will automatically analyze the deviation value of the hardware, and click the "Confirm" button, the software will automatically compensate the deviation value of the hardware, so that the user no longer needs to make manual adjustments to the hardware to achieve the purpose of calibration. The autofocus function eliminates the need to manually adjust the focus and allows the user to quickly and automatically find the clear interference fringes and move the scanning start position accurately through the one-button operation of the software to complete the entire measurement process. In addition, the FI-MT interferometer is equipped with coarse and fine adjustment buttons for manual focusing, which increases the flexibility of use.
Helpful Links
For instant communication, please click here
For our catalogs, please click here
For our home page, please click here
If you can't find a fixture suitable for you, please contact the supplier, we have professional staff to provide you with services.
Specification
Standard Configuration:
Options list:
Contact Us >>>Go
Shenzhen Neofibo Technology Limited.
* Can provide you with reliable polishing solution
* 17+ year Manufacturing Experience for polishing program
* Independent research and development patent - Neoholder®
* Products have CE, ISO9001, ROHS certification
* Support online video synchronization inspection machine
* Equipment test report and operation guide can be provided
* SGS certified factory, delivery speed and secure,50 units in stock
* 30 days quality problems can be returned
Product Description:
FI-MT single multi fiber end-face interferometer is a cost-effective, autofocus, non-contact fiber optic end-face interferometer. The product uses white light, red light interference principle to restore the geometry of the fiber end-face and then calculate the technical parameters, in the measurement of MT, MTRJ and other multi-core fiber optic connectors on the basis of compatibility with the single-core FC, SC, ST, LC, MU and other conventional connector measurements, one-key switching, the detection process of focusing, calibration, measurement are automatically completed through the software.
Key Feature:
FI-MT type single multi-core integrated fiber end-face interferometer is mainly divided into two parts: interferometer mainframe and special measurement software. The device is mainly characterized by the following:
(1) Measurement of a wide range of samples, with a large number of cores and fast speeds
The FI-MT interferometer offers extremely high resolution and a large field of view, with a test area of up to 3.3 mm X 2.6 mm. The software can now perform fast measurements on multi-pole connectors of up to 72 cores, and 12-pole connectors in as little as 5 seconds. Whether for process development or mass production, the FI-MT interferometer fixtures include MT/MPO insert fixtures, MT/MPO finished fixtures, MTRJ insert fixtures as well as SC general-purpose single-pole fixtures and LC general-purpose single-pole fixtures, which can satisfy the end-users' requirements for single-pole and multi-pole connector measurements.
FI-MT type single multi-core integrated fiber end-face interferometer is mainly divided into two parts: interferometer mainframe and special measurement software. The device is mainly characterized by the following:
(1) Measurement of a wide range of samples, with a large number of cores and fast speeds
The FI-MT interferometer offers extremely high resolution and a large field of view, with a test area of up to 3.3 mm X 2.6 mm. The software can now perform fast measurements on multi-pole connectors of up to 72 cores, and 12-pole connectors in as little as 5 seconds. Whether for process development or mass production, the FI-MT interferometer fixtures include MT/MPO insert fixtures, MT/MPO finished fixtures, MTRJ insert fixtures as well as SC general-purpose single-pole fixtures and LC general-purpose single-pole fixtures, which can satisfy the end-users' requirements for single-pole and multi-pole connector measurements.
(2)Simple software measurement interfeace.
FI-MT measurement software interface is intuitive and clear, easy to operate, and supports Chinese and English display. The software will automatically analyze and judge the data of the tested part, and reduce the geometric end face of the tested part to a three-dimensional diagram, giving 2D diagrams of the multi-core connector, section line diagrams, and single-core connector surface roughness diagrams, isometric diagrams, which is convenient for users to intuitively judge the condition of the connector's end face under test. At the same time, it automatically generates test reports and test data reports in Excel file format, which is convenient for document management and printing. In addition, single multi-core software switching just click a button, the software will automatically read the internal storage information according to the situation and convert the light source, standards, measurement mode and other information. To do a real one-button switch.
(3) convenient and intuitive hardware operation.
FI-MT interferometer only needs to connect the power cord and USB cable to complete the hardware connection. The interferometer fixture adopts taper angle locking positioning, no need to do any hardware adjustment after installing on the interferometer, through the software can complete the optical fiber image center positioning work. PC measurement mode and APC measurement mode conversion does not need to replace the fixture, and do not need to re-calibrate the interferometer, as long as the angle of the operating platform adjusted to the corresponding position can be directly measured.
(4) Fully automatic calibration, focusing and measurement functions.
FI-MT interferometer has built-in automatic calibration module, the whole process is simple and fast. The software has detailed text and picture prompts wizard to make the user's calibration more convenient, fast and intuitive. After the calibration is completed, the measurement software will automatically analyze the deviation value of the hardware, and click the "Confirm" button, the software will automatically compensate the deviation value of the hardware, so that the user no longer needs to make manual adjustments to the hardware to achieve the purpose of calibration. The autofocus function eliminates the need to manually adjust the focus and allows the user to quickly and automatically find the clear interference fringes and move the scanning start position accurately through the one-button operation of the software to complete the entire measurement process. In addition, the FI-MT interferometer is equipped with coarse and fine adjustment buttons for manual focusing, which increases the flexibility of use.
To know more products, please check quick links below connected to our homepage. Feel free to contact us.
| Fiber Polishing Machine | Fiber Polishing Fixture | Fiber Production Line Equipment | PM Fiber Alignment Systerm | Fiber Polishing Consumable |
| Fiber Cleaning Solution | Optical Power Meter | Fiber Tool | Fiber Optic Connectors and Apater | Indoor Cables |
Helpful Links
For instant communication, please click here
For our catalogs, please click here
For our home page, please click here
If you can't find a fixture suitable for you, please contact the supplier, we have professional staff to provide you with services.
Click Here And View More >>>Go
Specification
| Multi Mode |
Item | Test Range | Repeatable | Reproducibility |
| Radius of curvature in X/Y direction (mm) | 3~∞ | 1% | 3% | |
| X/Y direction end face angle (°) | 0 or 8 | 0.01 | 0.02 | |
| Fiber height (um) | -2~8 | 0.015 | 0.025 | |
| Test speed (sec) | MT-12 core Ferrule 5s(Without focusing time) | |||
| Single Mode |
Radius of curvature R (mm) | 3~∞ | 0.1% | 0.2% |
| Fiber height H (nm) | -150~+150 | 1 | 2 | |
| Vertex offset L (um) | 0~500 | 0.2 | 1.5 | |
| APC angle (°) | 0~8 | 0.01 | 0.015 | |
| Test speed | 0.5s | |||
| Objective Magnification | 2X | |||
| Resolution | 2.6um | |||
| Light Source | Red + White | |||
| Power | 24V 10A | |||
Standard Configuration:
| No | Product Name | Model | Qty |
| 1 | Interferometer Mainframe | FI-MT | 1set |
| 2 | Computer Host | LENOVO-PC | 1set |
| 3 | MT APC Ferrule Fixture | HDR-GSY- | 1pc |
| 4 | MT PC Ferrule Fixture | HDL-GSY- | 1pc |
| 5 | SC Connector Positioning Plate | DWP-GSY-SC | 1pc |
| 6 | FC Connector Positioning Plate | DWP-GSY-FC | 1pc |
| 7 | LC Connector Locator Tabs | DWP-GSY-LC | 1pc |
| 8 | 2.50mm Ferrule Aligner | JZJ-GSY-2.50 | 1pc |
| 9 | 1.25mm Ferrule Alignment Fittings | JZJ-GSY-1.25 | 1pc |
| 10 | SC APC Reference | CKJ-SCAPC | 1pc |
| 11 | Operator's manuals | OG-FI | 1pc |
| 12 | Software | USB flash drive or CD-ROM | 1pc |
Options list:
| No | Name | Model | Unit | Qty |
| 1 | SMA905 Ferrule Fixture | HDR-GSY-SMA | Pc | 1 |
| 2 | SMA905 Ferrule Standard Component | JZJ-GSY-SMA | Pc | 1 |
| 3 | SMA905 Ferrule Fixture | HDR-GSY-SMA | Pc | 1 |
| 4 | SMA905 Ferrule Standard Component | JZJ-GSY-SMA | Pc | 1 |
Contact Us >>>Go
Shenzhen Neofibo Technology Limited.
We have 17+ years experience.could provide optic fiber production line and service for you. you can count on us to offer you the best solution.Neofibo is focusing on the field of fiber optic polishing solutions.We specialize in manufacturing fiber optic polishing machine, design various optical fiber connectors polishing fixtures, provide completed polishing process and materials for all kinds of fiber optic connectors.Neofibo can provide not only products, but also technical services and R & D support.
1.Polished ferrules could not reach required shape or quality.
(1)Film is used over 40 times.
(2)Water doesn't be used.
(3)Films are not cleaned completely.
(4)Ferrules and jig are not fixed correctly.
(5)The distance adjustment between screw top and Plane A is not correct.
2.Bad quality for the polished surface.
(1)Film is used over 40 times.
(2)Polishing liquid is not used.
(3)Film is dirty.
(4)Ferrules are not cleaned completely.
(5)Scraped by film when pulling out the ferrules.
3.How can we guarantee quality?
(1)Always a pre-production sample before mass production;
(2)Always final Inspection before shipment;
4.what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese
(1)Film is used over 40 times.
(2)Water doesn't be used.
(3)Films are not cleaned completely.
(4)Ferrules and jig are not fixed correctly.
(5)The distance adjustment between screw top and Plane A is not correct.
2.Bad quality for the polished surface.
(1)Film is used over 40 times.
(2)Polishing liquid is not used.
(3)Film is dirty.
(4)Ferrules are not cleaned completely.
(5)Scraped by film when pulling out the ferrules.
3.How can we guarantee quality?
(1)Always a pre-production sample before mass production;
(2)Always final Inspection before shipment;
4.what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese
Please contact us if you have any questions or needs.
![[Hot Item] Sophisticated UV Marble Surface Wall Panel for Learning Centers in Germany with Robust Qualities and Luxury Appeal](http://image.made-in-china.com/2f0j00aCJqcewGLNrz/Sophisticated-UV-Marble-Surface-Wall-Panel-for-Learning-Centers-in-Germany-with-Robust-Qualities-and-Luxury-Appeal.webp)
![[Hot Item] Functional UV Marble Slab Wall Panel for Retail Showrooms in Chicago with Compatible Adhesives and Beautiful Finishing](http://image.made-in-china.com/2f0j00aZYoMHfJstuL/Functional-UV-Marble-Slab-Wall-Panel-for-Retail-Showrooms-in-Chicago-with-Compatible-Adhesives-and-Beautiful-Finishing.webp)
![[Hot Item] Most Popular Laminate Marble Pattern Design Manufacturer Gloss Marble Board Wall Panel](http://image.made-in-china.com/2f0j00wMNqdkhJdCrv/Most-Popular-Laminate-Marble-Pattern-Design-Manufacturer-Gloss-Marble-Board-Wall-Panel.webp)
![[Hot Item] Water-Resistant UV Marble Tile Wall Panel for Tropical Hotel Spas in Thailand with Anti-Mold and Eco-Friendly Characteristics](http://image.made-in-china.com/2f0j00aBwctgJoCNzE/Water-Resistant-UV-Marble-Tile-Wall-Panel-for-Tropical-Hotel-Spas-in-Thailand-with-Anti-Mold-and-Eco-Friendly-Characteristics.webp)
