Glass Filled Nylon (PA66-GF30) and Polypropylene (PP) are the two most quoted options for home appliance plastic parts in medical and healthcare projects. Both are widely available, but they behave very differently once they are in service.
This guide is written for engineers, purchasers and project managers who need a practical answer, not a resin data sheet.
This category covers a family of products rather than a single item. In practice a buyer defines home appliance plastic parts by three things: the base resin, the format or dimension, and the performance or certification level it has to meet. Typical options in this category include food contact interiors; glass filled structural frames; heat resistant grades above 100°C. Materials most often specified are Acrylonitrile Butadiene Styrene, Polystyrene, Polycarbonate, Polypropylene, and the choice between them changes stiffness, temperature resistance, chemical behaviour and price.
In the medical and healthcare sector the decision is usually driven by biocompatibility and sterilisation stability, with full traceability as a secondary requirement. Typical end uses include IV sets and tubing, surgical instrument handles, syringe barrels.
Typical values for a general purpose grade are listed below; filled, stabilised and speciality compounds will differ.
| Material | Density | Tensile strength | Service temperature |
|---|---|---|---|
| Acrylonitrile Butadiene Styrene | 1.04-1.06 g/cm³ | 30-50 MPa | -20°C to 80°C |
| Polycarbonate | 1.20 g/cm³ | 55-70 MPa | -40°C to 120°C |
| Polystyrene | 1.04-1.06 g/cm³ | 30-50 MPa | -20°C to 70°C |
Glass Filled Nylon is frequently the default selection here: Glass filled nylon lets a plastic bracket replace die-cast metal at a fraction of the weight.
Glass Filled Nylon grades offer two to three times the stiffness of unfilled nylon, while Polypropylene brings lowest density among commodity plastics. For medical and healthcare service the difference shows up in creep and in the long term behaviour under load.
The practical decision usually comes down to the service environment: temperature, chemical exposure and expected lifetime.
Beyond the base resin, most suppliers offer UV stabilised, food contact, flame retardant, anti-static and recycled content versions of the same product. Ask which additive package is included, because it is often the difference between a part that lasts three years and one that lasts ten.
Each step below has its own control points, and skipping one of them is where most defects start.
Secondary operations such as printing, welding, machining and assembly are often cheaper to do in the same factory, and they reduce the risk of mismatch between components.
Use this checklist when comparing two or three supplier quotations.
Send this list to your supplier with the drawing and you will receive comparable quotations from every factory you contact.
Standard production tolerance follows the relevant ISO or DIN tolerance class for the process; tighter tolerances are possible after machining or grinding, but they add cost. Define the tolerance only on the functional dimensions.
Yes. {mat1} is one of our regular materials for this item, and we can supply virgin, modified and certified grades with full traceability. Material certificates and test reports are issued per batch.
Standard packing is export cartons on fumigation-free pallets, with custom labelling, barcode and retail packing available. We also handle consolidated containers and door to door delivery.
We can provide ISO 9001 quality system documentation, material certificates, RoHS and REACH statements, and where applicable food contact, flame retardancy or drinking water approvals. Tell us your target market and we will match the document set.
A new tool typically takes 25 to 45 days depending on cavity count and complexity, followed by T1 samples within one week. Existing tools can usually start production within 10 to 15 days of order confirmation.
If you are planning a new medical and healthcare project, send us your drawing, annual volume and target properties, and we will come back with a material proposal, a tooling plan and a budget quotation.
Rubber & Plastics © 2026 All Rights Reserved. Yingnet.com — Global B2B trade platform for rubber & plastics manufacturers.
About Us | Contact Us | Help Center | Sitemap