Design Guide for PET Electronics and Accessory Blister Packaging in electronics and electrical: Draft, Radii and Draw Ratio

Thermoforming rewards designs that respect how a heated sheet stretches. These rules prevent most tooling rework and most thickness complaints.

Everything here can be checked on a real sample before you commit to a production order.

Product Overview

This category covers a family of products rather than a single item. In practice a buyer defines electronics and accessory blister packaging by three things: the base resin, the format or dimension, and the performance or certification level it has to meet. Typical options in this category include tamper evident sealing; gauge 0.30 to 0.70 mm; custom cavity for cables and adapters. Materials most often specified are Polyvinyl Chloride, Polypropylene, Recycled PET, Polystyrene, and the choice between them changes stiffness, temperature resistance, chemical behaviour and price.

In the electronics and electrical sector the decision is usually driven by ESD protection and dimensional accuracy, with cleanliness as a secondary requirement. Typical end uses include connector carriers, component trays, battery packs.

Key Material Properties

These figures are typical for commercial grades and should be confirmed against the supplier's certificate for your specific lot.

Polyethylene Terephthalate is frequently the default selection here: High IV PET resin is the reason a 1.5 L bottle can be light yet hold carbonation pressure.

Design Rules for Thermoformed Parts

Thermoforming rewards designs that respect how the sheet stretches. These rules prevent most tooling rework.

• Confirm the trim method early: steel rule die, CNC router or press tool each have different tolerances.
• Leave a flat sealing flange of at least 6 mm when the pack has to be heat sealed or lidded.
• Keep the draw ratio moderate: deep cavities thin the sheet and force you to start with a thicker gauge.
• Make corner radii at least equal to the sheet thickness; sharp corners are where holes start.
• Avoid undercuts unless the tool has moving sections, which adds cost to every cycle.
• Design uniform wall thickness by avoiding abrupt depth changes in the same cavity.

Send these rules to your designer together with the sheet gauge and the target cycle time; most tooling modifications come from ignoring draft and corner radii.

Common Grades and Variants

• Polystyrene based: rigid and glossy
• Polypropylene based: lowest density among commodity plastics
• Polyvinyl Chloride based: inherently flame retardant
• Recycled PET based: lower carbon footprint than virgin resin

Beyond the base resin, most suppliers offer UV stabilised, food contact, flame retardant, anti-static and recycled content versions of the same product. Ask which additive package is included, because it is often the difference between a part that lasts three years and one that lasts ten.

Processing and Finishing Options

Processing method drives both cost and performance, so it should be fixed early in the design.

• Anti-static treatment
• Rf sealing
• Die cutting
• Pressure forming

Secondary operations such as printing, welding, machining and assembly are often cheaper to do in the same factory, and they reduce the risk of mismatch between components.

How to Specify Electronics and accessory blister packaging Correctly

Use this checklist when comparing two or three supplier quotations.

1. avoid sharp internal corners that abrade cables
2. check the cavity holds the product without rattle
3. validate the pack with a transit drop test
4. specify ESD grade with surface resistivity limits
5. confirm the hanging format accepted by the retailer

Send this list to your supplier with the drawing and you will receive comparable quotations from every factory you contact.

Frequently Asked Questions

Which certifications can you provide?

We can provide ISO 9001 quality system documentation, material certificates, RoHS and REACH statements, and where applicable food contact, flame retardancy or drinking water approvals. Tell us your target market and we will match the document set.

How long does tooling and sampling take?

A new tool typically takes 25 to 45 days depending on cavity count and complexity, followed by T1 samples within one week. Existing tools can usually start production within 10 to 15 days of order confirmation.

What packing and shipping options are available?

Standard packing is export cartons on fumigation-free pallets, with custom labelling, barcode and retail packing available. We also handle consolidated containers and door to door delivery.

Do you offer samples?

Yes. Standard samples are normally free of charge and shipped within three working days; custom samples are charged at cost and credited against the first production order.

What tolerance can be achieved?

Standard production tolerance follows the relevant ISO or DIN tolerance class for the process; tighter tolerances are possible after machining or grinding, but they add cost. Define the tolerance only on the functional dimensions.

Conclusion

Our team supplies electronics and accessory blister packaging to electronics and electrical customers worldwide, with samples, material certificates and full inspection reports available before mass production.