Marine and offshore buyers increasingly specify plastic cable insulation and jacketing instead of metal, wood or glass. Here is where they are used, why they work, and what to watch out for.
Everything here can be checked on a real sample before you commit to a production order.
This category covers a family of products rather than a single item. In practice a buyer defines plastic cable insulation and jacketing by three things: the base resin, the format or dimension, and the performance or certification level it has to meet. Typical options in this category include rated 300/500 V to 0.6/1 kV; insulation wall 0.4 to 3.0 mm; conductor 0.5 mm² to 400 mm². Materials most often specified are Polyurethane, Polyvinyl Chloride, High Density Polyethylene, Thermoplastic Elastomer, and the choice between them changes stiffness, temperature resistance, chemical behaviour and price.
In the marine and offshore sector the decision is usually driven by UV and salt resistance and impact strength, with buoyancy as a secondary requirement. Typical end uses include rope and netting, dock fenders, deck fittings.
Typical values for a general purpose grade are listed below; filled, stabilised and speciality compounds will differ.
| Material | Density | Tensile strength | Service temperature |
|---|---|---|---|
| High Density Polyethylene | 0.94-0.97 g/cm³ | 20-32 MPa | -50°C to 80°C |
| Polyurethane | 1.05-1.25 g/cm³ | 25-60 MPa | -30°C to 90°C |
| Thermoplastic Elastomer | 0.90-1.30 g/cm³ | 5-30 MPa | -40°C to 100°C |
Polyvinyl Chloride is frequently the default selection here: PVC can be formulated from rigid pipe compound to soft medical grade by changing plasticiser content.
The list below covers both high volume and specialised uses.
Beyond the base resin, most suppliers offer UV stabilised, food contact, flame retardant, anti-static and recycled content versions of the same product. Ask which additive package is included, because it is often the difference between a part that lasts three years and one that lasts ten.
The route below is the one most factories use for this type of part.
Secondary operations such as printing, welding, machining and assembly are often cheaper to do in the same factory, and they reduce the risk of mismatch between components.
Work through these points in order and most specification mistakes disappear.
Send this list to your supplier with the drawing and you will receive comparable quotations from every factory you contact.
Yes. Standard samples are normally free of charge and shipped within three working days; custom samples are charged at cost and credited against the first production order.
Yes. {mat1} is one of our regular materials for this item, and we can supply virgin, modified and certified grades with full traceability. Material certificates and test reports are issued per batch.
A new tool typically takes 25 to 45 days depending on cavity count and complexity, followed by T1 samples within one week. Existing tools can usually start production within 10 to 15 days of order confirmation.
Standard packing is export cartons on fumigation-free pallets, with custom labelling, barcode and retail packing available. We also handle consolidated containers and door to door delivery.
Colour is controlled with a masterbatch reference approved by the customer, and every production lot is checked against the approved sample under standard lighting before shipment.
Our team supplies plastic cable insulation and jacketing to marine and offshore customers worldwide, with samples, material certificates and full inspection reports available before mass production.
Rubber & Plastics © 2026 All Rights Reserved. Yingnet.com — Global B2B trade platform for rubber & plastics manufacturers.
About Us | Contact Us | Help Center | Sitemap