Design Guide for PP Clamshell Blister Packaging in toys and games: Draft, Radii and Draw Ratio

Thermoforming rewards designs that respect how a heated sheet stretches. These rules prevent most tooling rework and most thickness complaints.

The notes below come from day to day production and export work with overseas buyers.

Product Overview

This category covers a family of products rather than a single item. In practice a buyer defines clamshell blister packaging by three things: the base resin, the format or dimension, and the performance or certification level it has to meet. Typical options in this category include gauge 0.30 to 0.80 mm; hinged single piece designs; tamper evident tear strips. Materials most often specified are Recycled PET, Polyvinyl Chloride, Polyethylene Terephthalate, Polystyrene, and the choice between them changes stiffness, temperature resistance, chemical behaviour and price.

In the toys and games sector the decision is usually driven by child safety and presentation, with durability as a secondary requirement. Typical end uses include game inserts, model kit trays, craft set packs.

Key Material Properties

Typical values for a general purpose grade are listed below; filled, stabilised and speciality compounds will differ.

Polypropylene is frequently the default selection here: PP is the lightest mainstream packaging resin and keeps its shape under repeated flexing.

Design Rules for Thermoformed Parts

Apply these points before the tool is cut; after that every change costs tooling and time.

• Design uniform wall thickness by avoiding abrupt depth changes in the same cavity.
• Keep the draw ratio moderate: deep cavities thin the sheet and force you to start with a thicker gauge.
• Leave a flat sealing flange of at least 6 mm when the pack has to be heat sealed or lidded.
• Avoid undercuts unless the tool has moving sections, which adds cost to every cycle.
• Use a draft angle of at least 3 degrees per side so the part releases without vacuum locks.
• Confirm the trim method early: steel rule die, CNC router or press tool each have different tolerances.

Send these rules to your designer together with the sheet gauge and the target cycle time; most tooling modifications come from ignoring draft and corner radii.

Common Grades and Variants

• Polyvinyl Chloride based: inherently flame retardant
• Recycled PET based: lower carbon footprint than virgin resin
• Polypropylene based: lowest density among commodity plastics
• Polyethylene Terephthalate based: excellent barrier to CO2 and moisture

Beyond the base resin, most suppliers offer UV stabilised, food contact, flame retardant, anti-static and recycled content versions of the same product. Ask which additive package is included, because it is often the difference between a part that lasts three years and one that lasts ten.

Processing and Finishing Options

Processing method drives both cost and performance, so it should be fixed early in the design.

• Pressure forming
• Rf sealing
• Die cutting
• Vacuum forming

Secondary operations such as printing, welding, machining and assembly are often cheaper to do in the same factory, and they reduce the risk of mismatch between components.

How to Specify Clamshell blister packaging Correctly

Use this checklist when comparing two or three supplier quotations.

1. check the pack passes the retail drop test
2. confirm the trim method to avoid sharp edges
3. test the hinge for at least 20 open-close cycles
4. specify the closure type and tamper evidence level
5. avoid sharp internal corners at the hinge

Send this list to your supplier with the drawing and you will receive comparable quotations from every factory you contact.

Frequently Asked Questions

What packing and shipping options are available?

Standard packing is export cartons on fumigation-free pallets, with custom labelling, barcode and retail packing available. We also handle consolidated containers and door to door delivery.

What is the minimum order quantity for clamshell blister packaging?

For standard sizes and colours the minimum is usually one pallet or one production run; for custom tooling the economic minimum depends on the tooling cost amortised over the expected volume. Send us your annual volume and we will calculate the break even point.

What tolerance can be achieved?

Standard production tolerance follows the relevant ISO or DIN tolerance class for the process; tighter tolerances are possible after machining or grinding, but they add cost. Define the tolerance only on the functional dimensions.

How long does tooling and sampling take?

A new tool typically takes 25 to 45 days depending on cavity count and complexity, followed by T1 samples within one week. Existing tools can usually start production within 10 to 15 days of order confirmation.

How do you control colour consistency?

Colour is controlled with a masterbatch reference approved by the customer, and every production lot is checked against the approved sample under standard lighting before shipment.

Conclusion

If you are planning a new toys and games project, send us your drawing, annual volume and target properties, and we will come back with a material proposal, a tooling plan and a budget quotation.